Setting the minimum system temperature
Note
Only available, if this value was enabled in the code.
Notify your heating contractor if required.
Set a value according to the minimum required tem-
perature for the heating system. When the temperature
falls below this value, the boiler or the additional heat
generator starts.
Press the following keys:
1.
for the "Extended menu".
å
Restoring factory settings
You can individually restore all modified values for
each heating circuit to their factory setting.
Press the following keys:
1.
for the "Extended menu".
å
2.
/
for "Settings".
|
~
3.
to confirm.
d
4.
/
for "Standard setting".
|
~
5.
to confirm.
d
6.
/
for selecting the required parameter group.
|
~
The parameter groups available are "Gen-
eral", "Heating" or "DHW".
Select the required heating circuit under
"Heating" with
7.
to confirm.
d
8.
/
for "Yes".
|
~
9.
to confirm.
d
The following settings and values of the selected
parameter group are reset:
■
Set room temperature
Set DHW temperature
■
Time program for central heating
■
■
Time program for DHW heating
■
Time program for DHW circulation pump
■
Party mode is deleted
Economy mode is deleted
■
Holiday program is deleted
■
■
Heating curve slope and level
/
and continue.
Ù
Ú
2.
/
for "Boiler".
|
~
3.
to confirm.
d
4.
/
for "Min set system temp".
|
~
5.
to confirm.
d
6.
/
for the required temperature.
|
~
7.
to confirm.
d
Further adjustments
37