Advertisement
2
PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push
by tip of the pencil.
If timer indication is fl ashing, go to the next step 2.
2. Press
or
: adjust the time.
3. Press
: Set the time.
Remote Control Reset
Push
by tip of the pencil or
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
3
AIR FLOW DIRECTION
FIX
Press
: Move the louver in
1
the desired vertical direction.
SWING
2
Press
: Swing the air
automatically and press again to stop.
For horizontal direction, adjust
3
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
4
REMOTE CONTROL
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Setup button (SET)
" Clear button (CLR)
# Memory and Preset button (PRESET)
$ One-Touch button (ONE-TOUCH)
% High power button (Hi-POWER)
& Economy button (ECO)
( Quiet button (QUIET)
) Comfort sleep button (COMFORT SLEEP)
~ Filter reset button (FILTER)
+ Set clock button (CLOCK)
, Check button (CHECK)
- Reset button (RESET)
Note:
•
The provided Remote Controller is a wireless type, which also can be
used as a wire. Please see "How to Connect The Remote Controller
for Wired Operation", located in installation instruction, in case of wired
control is required.
•
In wire operation, remote controller will return to initial condition
(PRESET, TIMER and CLOCK will return to initial condition) when user
shutdown power supply of Air conditioner.
5
ONE-TOUCH
Press the "ONE-TOUCH" button for fully automated operation that is
customized to the typical consumer preferences in your region of the world.
The customized settings control temperature air fl ow strength, air fl ow
direction and other settings to provide you alternate contact with "ONE-
TOUCH" of the button. If you prefer other settings you can select from the
many other operating functions of your Toshiba unit.
ONE-TOUCH
Press
: Start the operation.
1110655160_EN.indd 3
1110655160_EN.indd 3
6
To automatically select cooling or fan only operation
7
8
For dehumidifi cation, a moderate cooling performance is controlled automatically.
9
To automatically control room temperature and airfl ow for faster cooling
operation (except in DRY and FAN ONLY mode)
10
To automatically control room to save energy (except in DRY and FAN ONLY
mode)
Note: Cooling operation; the set temperature will increase automatically 1
1
11
In case of the misplaced or discharged remote control
#
4
2
6
3
5
SWING
FAN
7
(
$
ONE-TOUCH
FIX
QUIET
&
%
Hi POWER
12
"
COMFORT
8
9
SLEEP
Set the timer when the air conditioner is operating.
)
!
,
-
+
~
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Note:
AUTOMATIC OPERATION
MODE
1. Press
: Select A.
2. Press
: Set the desired temperature.
FAN
3. Press
: Select AUTO, LOW , LOW+
MED+
, or HIGH
.
COOLING / FAN ONLY OPERATION
MODE
1. Press
: Select Cool
or Fan only
2. Press
: Set the desired temperature.
Cooling: Min. 17°C, Fan Only: No temperature indication
FAN
3. Press
: Select AUTO, LOW , LOW+
MED+
, or HIGH
.
DRY OPERATION
MODE
1. Press
: Select Dry
.
2. Press
: Set the desired temperature.
Hi-POWER OPERATION
Hi POWER
Press
: Start and stop the operation.
ECO OPERATION
Press
: Start and stop the operation.
degree/hour for 2 hours (maximum 2 degrees increase).
TEMPORARY OPERATION
• Pressing the RESET button, the unit can start or
stop without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
TIMER OPERATION
Setting the ON Timer
1
Press
Press
: Set the desired
ON timer.
2
Press
: Set the timer.
Press
3
Press
: Cancel the timer.
Press
Setting Daily Timer
1
3
Press
: Set the ON timer.
2
4
Press
: Set the OFF timer.
• During the daily timer is activating, both arrows ( , ) are indicated.
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
, MED
,
EN
.
CT
, MED
,
Setting the OFF Timer
: Set the desired
OFF timer.
: Set the timer.
: Cancel the timer.
Press
.
Press
button during
the ( or ) mark fl ashing.
9/10/2558 BE 15:07
9/10/2558 BE 15:07
Advertisement
