Listen To Music From Bluetooth Device - Horizon Fitness Acustico HAV-H8700 Operating Instructions Manual

- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
1. During ON mode, press the button repeatedly on the unit or the SOURCE button on the remote control
to select Bluetooth mode. "NO BT" will show on the display if the unit is not paired to any Bluetooth device.
2. Activate your Bluetooth device and select the search mode. "HAV-H8700" will appear on your Bluetooth
device list.
- If you cannot find the unit, press and hold the /PAIR button on the remote control to be searchable. The
display will show "PAIR" and you will hear "Pairing" from the unit.
3. Select "HAV-H8700" in the pairing list. After successful pairing, you will hear "Paired" from the unit, and the
display panel shows "BT".
4. Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the unit
after the "Disconnected" voice prompt.
- Press and hold the /PAIR button on the remote control.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
• If you want to reconnect your device to this player, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please check if the device is still
connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the
music stored on the device through the player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's remote
control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the /PAIR button on the remote control.
- To skip to a track, press the buttons on the remote control.
31