Basic Operation; Standby/On; Automatic Power Off Function; Select Modes - Horizon Fitness Acustico HAV-H8700 Operating Instructions Manual

NOTE:
If the wireless connection fails again, check if there is conflict or strong interference (for example, interference
from an electronic device) around your location. Remove these conflicts or strong interferences and repeat the
above procedures.
• The subwoofer should be within 6 m (18 feet) of the soundbar in an open area.
• If a TV or an external device is connected, the main unit (only in AUX mode) and the subwoofer will switch on
automatically when the TV or the external device is switched on.
• If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will flash.
Follow step 1 ~ 4 above to pair the subwoofer to the main unit.

Standby/ON

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
• Press the button on the unit or on the remote control to switch the unit ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- If a TV or an external device is connected, the unit will switch on automatically when the TV or the external
device is switched on.

Automatic Power Off Function

The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is
disconnected, switched off or the volume is too close to mute.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.

Select Modes

Press the (SOURCE) button on the unit or the SOURCE button on the remote control repeatedly to select
the AUX, OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI ARC, USB and BT (Bluetooth) mode. The selected mode
will show on the display.

Adjust the Bass/Treble Level in Custom EQ mode

1. Make sure that the EQ is set to CUSTOM mode.
2. Press the BASS/TREBLE button on the remote control. The display will show SELECT BASS/ TREBLE. Press the
VOL+/VOL– button repeatedly to adjust the bass/treble level from BASS+8/BASS–8 to TREBLE+8/TREBLE–8.
3. After about 5 seconds, the unit will exit from BASS/TREBLE setting. The display will show the current selected
mode.
4. You may now press the VOL+/VOL– button to adjust volume.

Adjust the Bass level of the Subwoofer

1. Press the SUB VOL button on the remote control to activate Subwoofer bass level setting.
2. Press the VOL+/VOL– button repeatedly to adjust the bass volume level from BASS+5 to BASS–9.
3. After about 5 seconds, the unit will exit from BASS level setting of the subwoofer. The display will show the
current selected mode.
4. You may now press the VOL+/VOL– button to adjust volume.
29

Basic Operation