Remote Control; Preparations; Prepare The Remote Control; Replace The Remote Control Battery - Horizon Fitness Acustico HAV-H8700 Operating Instructions Manual

Remote Control

1 -
2 - VOL+/VOL-
3 - MUTE
4 - CUSTOM
5 - BASS
6 - SOURCE
7 -
8 - /PAIR
9 - SUB VOL
10 - EQ
11 - TREBLE

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.
• Even if the Remote Control is operated within the effective range 19.7 feet (6 m), remote control operation
may be impossible if there are any obstacles between the unit and the remote control.
• If the Remote Control is operated near other products which generate infrared rays, or if other remote
control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.
First-time use:
The remote control has a pre-installed lithium CR2025 battery. Remove the protective tab to
activate the remote control battery.

Replace the Remote Control Battery

- The remote control requires a CR2025, 3V Lithium battery.
1. Push the tab on the side of the battery tray towards the tray.
2. Now slide the battery tray out of the remote control.
3. Remove the old battery. Place a new CR2025 battery into the battery tray
with the correct polarity (+/-) as indicated.
4. Slide the battery tray back into the slot in the remote control.
Precautions Concerning Batteries
• When the Remote Control is not to be used for a long time (more than a month), remove the battery from
the Remote Control to prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with
new ones.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries.
• Never throw them in fire or water.
Switch the unit between ON and
STANDBY mode.
Increase/decrease the volume level.
Mute or resume the sound.
Press to select default EQ effect.
Press to activate the bass setup in default
EQ / Dolby Atmos mode.
Select the play function.
Skip to previous/next track in Bluetooth /
USB mode.
Play/pause/resume playback in
Bluetooth/USB mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect
the existing paired Bluetooth device.
Press to enter bass level setting for the
subwoofer.
Select equalizer (EQ) Effect.
Activate treble setup in default EQ setting.

Preparations

24