Table of Contents
Advertisement
32
S A G E M E T E R I N G , I N C .
SRE Series Remote Style Explosion Proof Mass Flow Meters
1,3,4
IN-LINE STYLE
Class I, Division I, Group B, C, D. 150#, 300#, or 600# flanged
ends are optionally avail able. (1" Flow Body shown)
4.50
4.69
CONDUIT FITTING
(Customer Supplied)
CONDUIT
FITTING
8.00
25' CABLE SUPPLIED
Can be shortened or even lengthened
in the field by up to 1000 feet without
affecting calibration.
MOUNTING HARDWARE FOR REMOTE EXPLOSION
PROOF METERS
7.50
REV. 03-SIE/SRE
7.94
5.31
3.00 dia.
JUNCTION BOX
(No Electronics)
1.5
3.00
ON CENTER
(TWO HOLES)
1/8"
THICK
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
2,4
INSERTION STYLE
Class I, Division I, Group B, C, D. 150#, 300#, or 600#
flanged mounting is optionally available. Available probe
lengths ( ) are 6", 12", 15", 18", 24", 30", 36" or 48".
C
JUNCTION BOX
(No Electronics)
CONDUIT FITTING
(Customer Supplied)
1 NPT Fittings standard
2 Flanged Mounting available for high pressure operation
3 Flow Conditioning built in to Flow Meter Pipe Sizes 3/4" and up. Contact Sage for optional 1/4" tube
flow body
4 3/4" Female NPT (3) for wiring access and flowbody or probe cable.
5 Customer will usually replace the cable that is supplied with their own cable.
a
CAUTION: Cable and cable glands are not for
use in hazardous area environments. Power,
ground, outputs, shielded cable, seal fittings
and conduits are to be supplied by customer.
CSA approved installations must comply with
CEC Part 1 Appendix J18-100
JUNCTION BOX
Class I, Group B, C, D
Class II, Group E, F, G
NEMA 7 & NEMA 9
5
CONDUIT FITTING
(Customer Supplied)
25' CABLE SUPPLIED
Can be shortened or
even lengthened in
the field by up to
1000 feet without
affecting calibration.
TRANSDUCER ENCLOSURE
Class I, Group B, C, D
Class II, Group E, F, G
Class III
CENELEC: EExd IIC, 1P66
NEMA 4X, 7BCD, 9EFG
Advertisement
Table of Contents
