Download Print this page
MOOD ProFusion iS Wi-Fi Set-Up Manual

MOOD ProFusion iS Wi-Fi Set-Up Manual

Hide thumbs Also See for ProFusion iS:

Advertisement

Quick Links

ProFusion
iS
WIFI SETUP GUIDE
ProFusion PL-U2NA WiFi Adapter
REV02072014
Have questions or need assistance? Contact us at 800 345.5000.

Advertisement

loading

Summary of Contents for MOOD ProFusion iS

  • Page 1 ™ ProFusion WIFI SETUP GUIDE ProFusion PL-U2NA WiFi Adapter REV02072014 Have questions or need assistance? Contact us at 800 345.5000.
  • Page 2 Connecting ProFusion iS to Your WiFi Network Follow the instructions below to configure your ProFusion iS for WiFi connectivity. 1) Connect USB WiFi Adaptor to ProFusion iS Place your ProFusion iS in shutdown mode by pressing the front panel Standby STEP 1 button twice.
  • Page 3 (>) is on Set Configuration, then press the * button. NOTE: If you receive the following message, please contact Mood at 800 345.5000 for further assistance and instructions: System locked:>ACTIVATE, access to this menu has been restricted.
  • Page 4 B) Set IP Type Press the NAVIGATION DOWN button until the current line indicator (>) STEP 1 is on Set IP Type, then press the * button. The screen will show IP Type: and the current setting (DHCP [default] STEP 2 or STATIC).
  • Page 5 D) Set SSID (Noted as ESSID on Device) Press the NAVIGATION DOWN button to move the current line indicator STEP 1 (>) to Set ESSID, then press the * button. A list of networks broadcasting their SSID (ESSID) will be displayed. STEP 2 This may take a few seconds depending on the number of wireless networks in your area.
  • Page 6 E) Set Security Press the NAVIGATION DOWN button to move the current line indicator STEP 1 (>) to Set Security, and then press the * button. Press the NAVIGATION UP or NAVIGATION DOWN buttons until the STEP 2 current line indicator (>) is on the desired security type (options are NONE, WEP, WPA and WPA2), then press the * button.
  • Page 7 This completes the WiFi configuration process. If your ProFusion iS was connected previously via Ethernet, reset the player by pressing the Standby button twice to enter Shut Down mode, press the main power switch on the rear panel of the player to the ‘off’...

This manual is also suitable for:

Profusion pl-u2na