1. Manuals
  2. Brands
  3. MOOD Manuals
  4. Recording Equipment
  5. PROFUSION iS
  6. Getting started

MOOD PROFUSION IS Getting Started

Hide thumbs Also See for PROFUSION IS:
1
2
3
Table of Contents

Advertisement

Quick Links

Download this manual

Getting Started

Checking the Package Contents

(1) ProFusion iS device
1
(1) ProFusion iS User Guide
2
(1) External Power Supply (US version AC line power cord supplied)
3
(1) Composite video + stereo audio cable w/ m-m RCA
4
(1) HDMI cable
5
(1) S-video cable
6
(1) CAT5 cable
7
Any additional or different cables required to complete the installation will need to be ob-
tained separately. Please keep all packaging material for later use in case your ProFusion
iS must be reshipped.

Installation and Setup

Placement Guidelines

ProFusion iS is designed to be placed horizontally and right-side up. Other positions may
1
cause problems with air flow within the case and may significantly shorten the lifespan of the
components.
ProFusion iS should be placed in a clean, well-ventilated area. Do not stack items on or against your
2
ProFusion iS as this can create excessive heat and/or static electricity charge problems.
ProFusion iS should only be placed on a surface of adequate strength and stability and free
3
of excessive vibration.
Ensure all cabling is routed properly and safely. This will avoid tripping hazards that could
4
pull your ProFusion iS off the surface you have placed it on.
Ensure your ProFusion iS is plugged into a properly grounded, always-on AC electrical outlet.
5
Note: Do not plug your ProFusion iS into a switched outlet, such as power strips or other
outlets that may be inadvertently turned off. This can lead to improper shutdowns which
will likely shorten the life of the equipment.

Rack Placement

If your ProFusion iS is going to be installed in a rack, at least 3.5" (8.89cm)(2RU) vertical rack
1
space will be required.
Do not improvise a rack mount solution; instead, install a rack shelf suitable for approximately 3.9lb
2
(1.77kg) of weight, and place your ProFusion iS on the shelf.
Note: ProFusion iS has been designed to be mounted in a rack. Please contact Mood Client
Care if you would like to order a rack mount kit.
1703 W. Fifth Street
Suite 600
Austin, TX 78703
Toll Free: 800 345.5000
Fax: 512 380.8501
moodmedia.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROFUSION IS and is the answer not in the manual?

Questions and answers

Related Manuals for MOOD PROFUSION IS

Summary of Contents for MOOD PROFUSION IS

  • Page 1: Getting Started

    ProFusion iS should be placed in a clean, well-ventilated area. Do not stack items on or against your ProFusion iS as this can create excessive heat and/or static electricity charge problems.
  • Page 2 If your ProFusion iS has been configured with one stereo zone or two mono zones, connect the red RCA plug of the audio cable to the RCA jack labeled Zone 2/R on the rear panel of your ProFusion iS. Connect the other red end of the RCA cable to the appropriate input of your amplification equipment.
  • Page 3 (>) is on Test Network Connection, then press the * button to initiate the Test Network Connection option. ProFusion iS will attempt to connect to its designated server. If the Test Network Connection is successful, the LCD control panel will display !.

Table of Contents