Line Configuration Menu - Cabletron Systems CBUQBR User Manual

Enterasys cbuqbr interface modules: user guide
Table of Contents

Advertisement

*) DEST PORT TYPE
E) CLEAR RECORD
F) LIST RECORD
G) LIST RECORDS 1-16
H) LIST RECORDS 17-32
I) LIST RECORDS 33-48

3.5.3 Line Configuration menu

For each selection, the following response is provided:
ENTER LINE NUMBER:
The Line Configuration contains up to 7 digits - which are the last 7 digits
of the line number. The least number that must be entered is the last
discrete 'B' channel digits, i.e. for numbers 123459 and 123460, the Line
Configuration must contain at least the number 59 for B1 and 60 for B2.
The best practice is fill in the last complete number block, for example in
the UK the last 6 digits (or 7 digits for city numbers).
entered is also used for dialling additional aggregation calls when using
the CBUQHS.
'Primary' refers to the B1 channel, Secondary the B2 channel.
Each entry requires a [CR].
80-14004000-01
Menu not available.
ENTER
The port number to be cleared
RECORD:
must be entered here. The entry
requires a [CR].
ENTER
The record number to be listed
RECORD:
must be entered here. The slot
and port routing for this port is
then displayed. The entry requires
a [CR].
Slot and port routing for records
1-16 is displayed.
Slot and port routing for records
17-32 is displayed.
Slot and port routing for records
33-48 is displayed.
Command Menu
The number
3–9

Advertisement

Table of Contents
loading

Table of Contents