Table of Contents
Advertisement
C) ALERT B-CHANNEL USAGE
A) ENABLED (F)
B) DISABLED
3.5.2 Routing menu
It is essential for the operation of the CBUQBR that Routing is
correctly set for every operational port of the application cards.
This menu below defines how incoming calls are 'mapped' to user ports
by defining the MSN and/or sub-addresses for the record entries. To
each record number is assigned an application card and its associated
port, also an MSN or sub-address.
In the case of absence of a sub-address or MSN from an incoming call,
the CBUQBR will attempt to match the 'B' channel to the record number.
You are advised however to ensure that both the network and your
CBUQBR are configured correctly for either sub-address or MSN. This
is due to the likelihood of the incorrect destination being chosen
otherwise.
Note that parameter A) SET SLOT/PORT must be set for a particular
record before setting parameters B, C and D, otherwise the record
cannot be displayed and is not fully configured.
80-14004000-01
Command Menu
Sends an ALERT indicating how
many 'B' channels are in use. The
ALERT message is:
ALERT B-Channel usage x,y
Where x and y are numerals in the
range 0 - 8 and :-
x is the number of channels in use
and y is the number of channels
remaining available.
x + y = 8.
This ALERT is disabled.
3–7
Advertisement
Table of Contents
