en Installation instructions
Store the remaining cable in the gap.
4.
Tighten the screw on the metal hook so that it is
5.
firmly in place.
Turning the air outlet clockwise
Ausgehend vom Auslieferungszustand, den Lüfter-
1.
kasten im Uhrzeigersinn drehen, sodass der
Luftauslass nach rechts zeigt.
Undo the screw on the metal hook.
2.
20
Das Kabel durch den Metallhaken ziehen.
3.
Das Kabel in die Kabelführung 4 einhängen.
4.
Tighten the screw on the metal hook so that it is
5.
firmly in place.
Finishing connecting the appliance
Guide the cable through the opening in the side
1.
cover.
20
Insert the side covers and screw them firmly in
2.
place.
Connect the cable.
3.
Press together the cable duct at the sides and at-
4.
tach.