Table of Contents
Advertisement
en Installation instructions
Screw the flat duct connection onto the fan group.
2.
Installing the appliance
WARNING ‒ Risk of injury!
¡ Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
¡ The appliance is heavy.
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
▶
Insert the appliance into the cut-out until you hear
1.
the mounting brackets engage.
Carefully screw in diagonally opposite screws.
2.
5
Tighten the screws one at a time so that the appli-
ance is not wedged in the cut-out.
18
Note: To ensure that the appliance is not damaged,
3.
do not overtighten the screws.
Carefully tighten screws in succession until the ap-
pliance is flush-mounted on the ceiling.
Connecting the appliance
Undo the screws on the top frame assembly using a
1.
screwdriver and remove the top frame assembly.
Press together the cable duct at the sides and re-
2.
move it.
Disconnect the cable at the appropriate point.
3.
Advertisement
Table of Contents
