Philips DTR2610 User Manual page 6

9
Next, highlight the country where you operate the
receiver by pressing V or W, and then press OK.
You are prompted to confirm your choice by pressing
OK again.
10
The next screen is used to select both the TV screen
format corresponding to your TV set and update mode.
Highlight the appropriate format by pressing C or B,
then move to the update mode selection using V or W,
and highlight Yes to allow for automatic software
upgrade. Alternatively, highlight No if you prefer to be
notified when software upgrade is available. Press OK to
initiate the channel search.
11
Once it has been completed, follow the prompts
displayed on the screen.
Press OK to store the channels found and tune the
receiver to the first found TV channel.
Now you are ready to enjoy viewing digital terrestrial TV.
Refer to chapter 5 and 6 to learn more about using your
receiver.
I N S TA L L AT I O N G U I D E 5