Spin Master STAR WARS Disney BB-9E Instruction Manual

Spin Master STAR WARS Disney BB-9E Instruction Manual

Advertisement

TROUBLESHOOTING
If normal function of the product is interrupted, radio interference may be causing the
issue. To reset the product, turn the head and body completely off, then back on. If
normal operation does not resume, change the RC Channel on the head and remote
and try again. To ensure normal performance, charge the batteries, as low batteries
may not allow full function.
HEAD
CONDITION
Low Battery (Head)
Low Battery (Body)
System Error
1
2
3
RED
BLUE
WHITE
BODY
RED
CONDITION
Head & Body Not Linked
Low Battery (Body)
TIP: If BB-9E is acting up, try a reset. Turn body and head completely off, then turn both
power switches back on. If this does not work make sure the head and body are fully
charged then try again.

IMPORTANT INFORMATION

Remove all packaging before use. Retain this information, addresses and phone
numbers for future reference. Please read User Instruction Guide for additional
important information. Content may vary from pictures. An adult should periodically
check this toy to ensure no damage or hazards exist, if so, remove from use.
Children should be supervised during play. Keep away from obstacles
and electrical hazards. Do not leave product unattended when on.

CARE AND MAINTENANCE

Always remove batteries from the controller when it is not being used for a long period of
time (controller/charger only). Wipe the toy gently with a clean damp cloth.
Keep the toy away from direct heat. Do not submerge the toy in water.
This can damage the electronics. Turn off the power on the controller
when not in use.
Fully charge the main body (NiMH battery) every 3 months for battery maintenance.
Spin Master logo & © Spin Master Ltd. All rights reserved.
Tous droits réservés.
SPIN MASTER LTD., 450 FRONT STREET WEST,
TORONTO, ON M5V 1B6 CANADA
Imported into EU by/Importé dans l'UE par
SPIN MASTER INTERNATIONAL, S.A.R.L., 20 RUE DES PEUPLIERS, L-2328, LUXEMBOURG
Customer Service: 1-800-622-8339 Email: customercare@spinmaster.com
© & ™ Lucasfilm Ltd.
T52127_0001_20087248_NEN_IS_R1(STW_Bb_9_S18)
12
RED LED
1
BLUE LED
2
WHITE LED (VR)
X
Flashing - 1Hz
Flashing - 1 Hz
X
Flashing - 2Hz
Flashing - 2Hz
Flashing - 2Hz
RED LED
1
Fast Flashing
Flashing - 1Hz
For additional help videos,
go to HeroDroidBB8.spinmaster.com
FIRST ORDER DROID
BB-9E
3
OFF
OFF
RESPONDS TO ENGLISH ONLY
1
x
Ni-MH
BATTERY INCLUDED
1
x
400mAh/3.7V
Lipo
BATTERY INCLUDED
I N S TR U CTI O N
1800
mAh
CAUTION: This toy contains inaccessible magnets.
Keep away from electronic and medical devices. Exposed
magnets, if inhaled or swallowed can stick together or to
other metal objects, and cause serious or fatal injury.
?
DO NOT RETURN TO THE STORE.
NORTH AMERICA – 1-800-622-8339,
+
CUSTOMERCARE@SPINMASTER.COM
www.
WWW.SPINMASTER.COM
6+ YEAR S
G U I D E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAR WARS Disney BB-9E and is the answer not in the manual?

Questions and answers

Summary of Contents for Spin Master STAR WARS Disney BB-9E

  • Page 1 Fully charge the main body (NiMH battery) every 3 months for battery maintenance. other metal objects, and cause serious or fatal injury. For additional help videos, Spin Master logo & © Spin Master Ltd. All rights reserved. Tous droits réservés. DO NOT RETURN TO THE STORE.
  • Page 2 TABLE OF CONTENTS CONTENTS 6+ Y EA RS IN S TR UC TI O N G UID E FIRST ORDER DROID CAUTIONS..............BB-9E ™ FIRST ORDER DROID BB-9E 1 BB-9E DROID HEAD ™ CONTENTS ..............RESPONDS TO ENGLISH ONLY INDICATOR LIGHTS ............Ni-MH 1800 BATTERY INCLUDED...
  • Page 3 BATTERY REMOVAL AND INSTALLATION CHARGING (BB-9E BODY) 1. Locate the Charging Port Door on the BB-9E body section. 1. Locate the battery door on the remote control. 2. Open the battery door with a philips screwdriver (not included). If used or spent batteries are present, remove these batteries from the unit by pulling up on one end of each...
  • Page 4 CHARGING (BB-9E HEAD) ASSEMBLY 1. Locate the Charging Port Door on the BB-9E head section. 1. Place BB-9E head on top of the body. 2. Assembly complete. 2. Open the Charging Port Door. 3. Move the Power Switch to the OFF Position. NOTE: You may need to twist BB-9E’s head to lock it into place.
  • Page 5 REMOTE CONTROL FUNCTIONS GET STARTED FRONT SIDE 1. Open the Charging Port Door on the BB-9E Droid body. THROTTLE LEVER ANIMATION BUTTON (Left/Right) 2. Move the Power Switch to the ON position. Red power indicator light will go ON. (Animate/Reverse Controls) Close the Charge Port Door.
  • Page 6 (crystal, semiconductor, etc) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd or they could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to insure NOTE: Use the Follow Me mode only in large areas to avoid running into walls or other objects.

Table of Contents

Save PDF