Vivotek Supreme IP9165-LPR User Manual page 57

■ Iris adjustment: Use the pull bar to change the aperture size. The preset iris aperture setting will
apply.
■ AE Speed Adjustment:
This function applies when you need to monitor fast changing lighting conditions. For example,
the camera may need to monitor a highway lane or entrance of a parking area at night where
cars passing by with their lights on can bring fast changes in light levels. The same applies if
the camera is installed on a vehicle, and when it needs to adapts to fast changes of light when
entering and leaving a tunnel.
■ WDR Pro:
This refers to the Wide Dynamic Range function that enables the camera to capture details in
a high contrast environment. Use the checkbox to enable the function, and use the slide bar
to select the strength of the WDR Pro functionality, depending on the lighting condition at the
installation site. You can select a higher effect when the contrast is high (between the shaded
area and the light behind the objects).
■ WDR:
This refers to the Wide Dynamic Range function that enables the camera to capture details in
a high contrast environment. Use the checkbox to enable the function, and use the slide bar
to select the strength of the WDR Pro functionality, depending on the lighting condition at the
installation site. You can select a higher effect when the contrast is high (between the shaded
area and the light behind the objects).
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile
mode to open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to Night mode or the Schedule mode. Please
manually enter a range of time if you select the Schedule mode. Then check the Save button for the
configuration take effect.
VIVOTEK
User's Manual - 57