Advertisement
WaveTester Series Test Kits
Certification Testing
Quick Reference Guide
For part numbers:
KIT-WT-WSSDst
KIT-WT-WSSDsc
OWL
Optical Wavelength Laboratories
Quick Reference Guide
Revision 1.1
Optical Wavelength Laboratories (OWL)
WaveTester Series
26009
N9623 West US Hwy 12
Firmware Version 2.56
Whitewater, WI 53190
Phone: 262-473-0643
Internet: OWL-INC.COM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OWL WaveTester Series
Summary of Contents for OWL WaveTester Series
- Page 1 WaveTester Series Test Kits Certification Testing Quick Reference Guide For part numbers: KIT-WT-WSSDst KIT-WT-WSSDsc Optical Wavelength Laboratories Quick Reference Guide Revision 1.1 Optical Wavelength Laboratories (OWL) WaveTester Series 26009 N9623 West US Hwy 12 Firmware Version 2.56 Whitewater, WI 53190 Phone: 262-473-0643 Internet: OWL-INC.COM...
- Page 2 GETTING STARTED Thank you for your purchase of this OWL certification test kit. Included in this kit is a WaveTester optical power meter and a WaveSource multimode fiber optic light source. This quick reference guide will assist you in setting up your test kit for a standards-based certification test.
- Page 3 REQUIRED ACCESSORIES (2) singlemode patch cables EQUIPMENT PORTS Figure 1 shows the ports used during this procedure. These ports may vary depending upon the model of equipment. FIGURE 1 Test Equipment Ports 1310 nm/ Detector (connector port on 1550nm light source may vary) WaveTester power meter WaveSource singlemode light source...
- Page 4 SET REFERENCE STEP 11 Press and hold the /AUTO button on the WaveTester to set it into AUTO mode. The WaveTester display should change to show readings in ‘dB’. STEP 12 Press and hold the /AUTO button on the WaveSource until you see the indicator LED begin flashing, then immediately release the button.
Need help?
Do you have a question about the WaveTester Series and is the answer not in the manual?
Questions and answers