Page 1
FLEXTOOL RIDE ON TROWEL FP846 O P E RA TING I N S T RU C T I ON S WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on this power equipment.
CONTENTS FUNCTIONS AND CONTROLS Introduction The trowel machine reproduces the action of hand trowels while giving a high quality dense finish with wear resistance. The angle of Applications the blades is adjustable during operation from a floating position, with the full blade area in contact to flatten the surface, to a Function and Controls finishing position with the blades tilted to give a finished surface.
HAZARDS AND RISKS ENSURE that the fuel tank cap is securely fitted after refuelling. ENSURE a serviceable appropriate type and size fire extinguisher is NEVER allow an untrained or suitable medically validated readily available for immediate use competent person to operate the machine without adequate assessment, instruction, competency validation and a signed JSEA and work method statement.
OPERATION handles in the same direction you wish to travel. Move the handles in the opposite directions to produce rotation on BEFORE OPERATION the machine axis. The following items should be checked on a daily basis before operating the trowel. Left handle forward, right handle backwards for clockwise direction.
Please book your machine with the operator can do the work faster and achieve a better slab a Flextool service co-ordinator to arrange for the no charge 25 finish. hour inspection service. If the inspection service is due while the...
It is recommended that, during floating, blades be kept in a flat YEARLY (2000 – 2500 HOURS) • Check arm bushings, thrust collar bushings, and shaft seals. position with the trowel working at ½ to ¾ of the full speed, and each pass should overlap the previous by half the width of the trowel.
SPECIFICATIONS TROWEL MACHINE Model FP846 Part Number F03846 Engine B & S Vanguard 35HP Dimentions (mm) 2540 x 1270 x 1360mm (100 x 50 x 53.3”) Panning pan width (mm) 2450mm (96.5”) Rotor Diameter (mm) 1190mm (47”) Max rotor speed...