Download
Share
Print this page
Flextool PORTATROWEL FPT30 Operating Instructions
  1. Manuals
  2. Brands
  3. Flextool Manuals
  4. Trowels
  5. PORTATROWEL FPT30
  6. Operating instructions

Flextool PORTATROWEL FPT30 Operating Instructions

Hide thumbs
1
Table Of Contents
2
3
4
5

Advertisement

Quick Links

Download this manual
OPERATING INSTRUCTIONS
PORTATROWEL
™
FPT30
To reduce the risk of injury, all operators and maintenance personnel must read and understand
these instructions before operating, changing accessories, or performing maintenance on this power
equipment. All possible situations cannot be covered in these instructions. However care must be
exercised by everyone using, maintaining or working near this equipment.
1300 353 986
flextool.com.au
Parchem Construction Supplies Pty Ltd
1956 Dandenong Rd, Clayton VIC 3168
WARNING

Advertisement

loading

Related Manuals for Flextool PORTATROWEL FPT30

Summary of Contents for Flextool PORTATROWEL FPT30

  • Page 1 All possible situations cannot be covered in these instructions. However care must be exercised by everyone using, maintaining or working near this equipment. 1300 353 986 flextool.com.au Parchem Construction Supplies Pty Ltd 1956 Dandenong Rd, Clayton VIC 3168...

  • Page 2: Table Of Contents

    Power Equipment with a damaged guard ring or with the guard ring removed. The goal of Flextool is to produce power equipment that helps 2. Blade Pitch Control – Turn the hand knob clockwise to the operator work safely and efficiently. The most important increase blade pitch, and counter-clockwise to decrease blade safety device for this or any tool is the operator.

  • Page 3: Operation

     Stop Switch operation QUALIFIED & LICENCED personnel. CONNECTING THE HANDLES FIRE & EXPLOSION HAZARDS Only Flextool 1.8m Clip Together Handles can be used with the PortaTrowel (Telescopic handles do not fit)  PETROL is extremely flammable and explosive under certain conditions.

  • Page 4: Care And Preventive Maintenance

    FLEXTOOL OPERATING INSTRUCTIONS PORTATROWEL STARTING THE ENGINE FINISHING OPERATION 1. Move the Throttle Control Lever to “MIN” position. Subject the desired concrete surface finish, the operator should adjust the blade pitch based on the hardness or plasticity of the 2. Move the Stop Switch to “ON” position.

  • Page 5: Spare Parts And Service

    Max 3 handles to be used at one time. Additional handles will FT401806-UNIT Flextool Clip Together Handle 180 mm result in reduced control of the PortaTrowel Note: Only Clip Together handles can be used with the PortaTrowel FPT30 (Telescopic Handle does not fit) 1300 353 986 flextool.com.au...