Initial Setup Steps; Step 1. Attach The Tv Stand Or Wall Mount Bracket - Hisense 50H5B Quick Start Manual

INITIAL SETUP STEPS

Step 1. Attach the TV Stand or Wall Mount Bracket

Attach the TV Stand
Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV facing upward on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Remove the two legs (that form the stand) from the accessory bag and then insert them into the bottom slots of the TV.
3. Secure the legs to the TV with the 4 screws in the accessory bag.
Disclaimer: This Quick Start Guide is intended as a general guideline to help you set up your Hisense TV.
Images throughout this document are for illustrative purposes only and may differ from the actual product.
Page 4
Leg
Please check foam
for accessories
before discarding.
Screws:
M4×12(40H5B)
M4×20(50H5B)