Handling And Operation - Silvercrest SET 600 A1 Quick Start Manual

Electric cooking pot
Hide thumbs Also See for SET 600 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

Handling and operation

DANGER! RISK OF ELECTRIC SHOCK!
Keep water and other liquids away from the appliance's mains cable
connection. There is a risk of fatal electric shock!
WARNING! RISK OF INJURY!
When filling, pay attention to the markings on the inside of the pot.
Do not fill the pot any higher than the MAX marking (1.2 l). Otherwise, the
boiling contents of the pot can splash out.
Only use fresh drinking water when cooking with the appliance. Do not
consume any water that is not certified as drinkable. Otherwise, there is a
risk of damage to health.
NOTE
The appliance is fitted with an overheating protector and a boil-dry protec-
tion device. If the appliance is accidentally switched on without food or
water in the pot, the appliance switches off automatically. Likewise, the
appliance switches off automatically if the appliance boils dry, e.g. because
the lid is left open. If this happens, allow the appliance to cool down before
using it again.
Fill the pot at least to the MIN marking (0.5 l). Otherwise, there is a possi-
bility that the appliance will boil dry and switch off automatically.
Always make sure that the rocker switch is set to O when you unplug
the appliance and if the mains cable is still connected to the appliance.
Otherwise, the appliance could heat up unintentionally as soon as the
mains plug is plugged in again.
1) Remove the lid from the pot.
2) Add food or water into the pot. When filling, pay attention to the MIN (0.5 l)
and MAX (1.2 l) markings on the inside of the pot.
3) Afterwards, close the lid and then position the pot so that it is stable and level
on the working surface.
4) Connect the mains cable to the mains cable socket.
5) Plug the mains plug of the mains cable into the socket.
6) Press the rocker switch
to the right to position I (Low: 300 W) for slow heating at a low tempera-
ture or
to the left to position II (High: 600 W) for rapid heating at a high
temperature.
The operating LED lights up orange.
6 
GB │ IE
SET 600 A1

Advertisement

Table of Contents
loading

Table of Contents