Changing Basic Settings; Setting The Time - Bosch SBI8EDS01A User Manual

Basic setting
Front display
Start programme
Tone volume
Button volume
Efficient Dry
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Press ⁠ .
1.
To open the basic settings, press
2.
for approx. 3 seconds.
Press repeatedly until the display
3.
shows the required setting.
Press or
4.
display shows the right value.
You can change several settings.
To save the settings, press
5.
approx. 3 seconds.
Selection
1
on
off
Auto Wash
Last programme
Scale with multiple
levels.
Scale with multiple
levels
off
On in all programmes
Auto Wash
on
off
off
Manual
Permanent
1
on
off
Reset
repeatedly until the
Description
Switch the front display on or off.
Set a default programme for when the appliance
1
is switched on.
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Set the button volume during operation.
Level 0 switches the button tones off.
Activate or deactivate automatic opening of the
1
appliance door during the drying phase.
→ "Efficient Dry", Page 12
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the Home Connect
app.
→ "Home Connect ", Page 38
Activate or deactivate
→ "Remote Start
This basic setting is not available until after you
have connected the device with the Home Con-
nect app.
→ "Home Connect ", Page 38
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.

Setting the time

To open the basic settings, press
1.
for approx. 3 seconds.
Press
2.
shows "Time setting".
Press
3.
display shows the required time.
Holding down
change the set values in 10-minute
steps.
for
To save the settings, press
4.
approx. 3 seconds.
Basic settings aus
", Page 39.
repeatedly until the display
or repeatedly until the
and will
for
37