Table of Contents
Advertisement
en Display
Display
-P-
End
and
1
E:60 / -2B
1
Example
22
Designation
Spin
Pause
End of programme
Childproof lock
Energy consumption
Water consumption
Wi-Fi
Energy manager
Active oxygen treat-
ment
Active oxygen treat-
ment
Foam detection system The appliance has detected too much foam.
Door
Tap
Error
Description
Programme status
Programme status
Programme status
¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is active and the pro-
gramme selector has been adjusted.
→ "Deactivating the childproof lock", Page 39
Energy consumption for the selected programme.
¡
: Low energy consumption
¡
: High energy consumption
Water consumption for the selected programme.
¡
: Low water consumption
¡
: High water consumption
¡ Lights up: The appliance is connected to your
home network.
¡ Flashes: The appliance is trying to connect to your
home network.
→ "Home Connect ", Page 40
The appliance is connected to the smart energy sys-
tem (energy manager).
→ "Connecting the appliance to the energy manager",
Page 42
Active oxygen treatment is activated.
A programme with active oxygen treatment has been
interrupted and the door is locked until the active oxy-
gen is no longer present in the drum.
Note: It may take up to 25 minutes until there is no
longer any active oxygen in the drum
→ "Error code / Fault display / Signal", Page 52
The door is unlocked and can be opened.
¡ No water pressure.
→ "Error code / Fault display / Signal", Page 52
¡ The water pressure is too low.
Error code, error display, signal.
→ "Error code / Fault display / Signal", Page 52
Advertisement
Table of Contents
