Related Manuals for Intimus CR-460 ECP
Summary of Contents for Intimus CR-460 ECP
- Page 1 CR-460 ECP MULTI-CREASING MACHINE Product user manual intimus International GmbH Bergheimer Straße 6-12 88677 Markdorf Germany www.intimus.com 95519 1 12/18...
-
Page 2: Table Of Contents
3. Components List …………………………………3 4. Installation Instructions ……………………………3 5. Safety Notes ………………………………………4 6. Operation Instructions ……………………………4 6.1 Creasing Operation Instructions ………………5 6.2 Perforating Operation Instructions ………………6 7. Troubleshooting ……………………………………8 8. Maintenance Notes ………………………………9 9. Technical Parameter ………………………………9 intimus CR-460 ECP... -
Page 3: Product Introduction
5. Attached Tools Storage Box Cover 6. Fixed Position Vernier 7. Moving Position Vernier 8. Vernier Rail 9. Vernier Lock 10. Vernier Bracket 11. Left Position Ruler 12. Right Position Ruler 13. Lift Handle 14. Operation Paper Entry intimus CR-460 ECP... - Page 4 4. Power Switch with Light 5. Power socket with Fuse Blade System 1. Blade Handle 2. Blade Cover 3. Blade Standard Label 4. Blade Support 5. Pressing Spring 6. Press Adjust Screw 7. Press Adjust Lock Screw intimus CR-460 ECP...
-
Page 5: Components List
3. Components List Name Qty. Notes CR-460 ECP Machine Creasing Blade System Installed Perforating Blade System Installed in the Storage Slot Power Line Tools box Foot pedal Switch User Manual 4. Installation Instructions Installation Location ★ Before the installation, please make sure the machine will be installed on an appropriate operation table and have enough space for operation. -
Page 6: Safety Notes
6. Operation Instructions Please read the user manual carefully before you start to use this creasing machine Please plug the machine’s power line in the socket Please make sure the operator is biside when machine is working intimus CR-460 ECP... -
Page 7: Creasing Operation Instructions
· Turn the switch to ”2”, the machine is under Semi-automatic mode. After insert the paper, the machine will finish one punch by treating the foot pedal, then the machine will be back to standby. Suggestion: We suggest you to turn the switch to “2” for Semi-automatic mode. intimus CR-460 ECP... -
Page 8: Perforating Operation Instructions
Using the suitable perforating blade system according to the thickness of the paper to make the perfect perforating effect. If the perforating blade system is not suitable for the paper may cause bad perforating effect or even damage the perforating blade system. intimus CR-460 ECP... - Page 9 When moving the Slide Positioning Model, please hold its head up and move the model parallelly. Please don’t move when its head on the vernire, in case any damage occurred to the model suit or vernire. intimus CR-460 ECP...
-
Page 10: Troubleshooting
Caution: Every time of the adjustment to the screw CANNOT be over 90 degrees to avoid the machine locking. intimus CR-460 ECP... -
Page 11: Maintenance Notes
·Drop some lubricating oil onto the two mandrils and axletree connecting position to ensure the smooth running of the mechanism every week. 9. Technical Parameter CR-460 ECP Function/Model Max Working Width 460mm Max Working Thickness 0.09-0.65mm(Creasing)/0.5mm(Perforating)
Need help?
Do you have a question about the CR-460 ECP and is the answer not in the manual?
Questions and answers