Ex-Usb-Pcm Auto Load Function - Korg M3 XPANDED Supplementary Manual

EX-USB-PCM Auto Load function

When you power-on the M3 XP
can automatically load EX-USB-PCM data (KEP files)
from a USB device connected to the USB A connector.
Note: The KEP file on the USB device must be located
in the root directory.
Auto Load setting
1. Press the MODE MEDIA switch to enter Media
mode. In the lower right of the display, press the
EX-USB-PCM tab to access the EX-USB-PCM page.
2. Select the EX-USB-PCM that you want to be
loaded automatically when the power is turned
on. Select the "Auto" box located at the left of the
"EX-USB-PCM Title."
The number of items you can select will depend on the
capacity of RAM1 and RAM2 (if the EXB-M256 is
installed) and on the size of each EX-USB-PCM. If the
size of the EX-USB-PCM exceeds the free space in
RAM memory, the box will be grayed-out and cannot
be selected.
This completes the settings.
2
Auto
Using the Auto Load function
1. Connect the USB device containing the KEP file to
the USB A connector of the M3 XP
2. Power-on the M3 XP
ANDED
The M3 XP 's display will show a red progress
ANDED
bar while the system data is being loaded. When the
system data has finished loading, a blue progress bar
will be shown while the KEP file is auto-loaded.
During this process, the title of the KEP file that is
loading will be shown at the bottom of the display.
Note: Never disconnect the USB device containing the
KEP file while the data is being loaded.
Note: Once the Auto Load has finished, there is no need
for the USB device to be connected unless you will
need to load other data.
, this function
ANDED
.
ANDED
.
EX-USB-PCM Auto Load function
9