Table of Contents
Advertisement
Playing the programs of PCM expansion option
2. Press the MODE MEDIA switch to enter Media
mode.
3. In the lower right of the display, press the Media
Info tab to access the Media Info page.
4. In the upper right of the display, press the menu
button, and then press "Scan USB device" to
detect the USB device.
Note: If more than one USB device is connected to the
USB A connectors, use "Media Select" to select the
device that contains the file you want to load.
5. In the lower left of the display, press the Load tab
to access the Load page.
6. Select the KEP file that you want to load, and press
the Load button.
7. A dialog box will appear. Press the OK button to
load the data.
If you load an EX-USB-PCM that is not shown in the
EX-USB-PCM page, the title will be added to the list at
this point.
About KEP files
Files with an extension of KEP (Korg EX PCM) handle
expansion PCM data. This is a dedicated format for the
Korg M3 XP
ANDED
KEP files contain PCM data and parameter data. The
PCM data will be loaded into RAM memory (RAM1,
RAM2*). The parameter data will be loaded into the
system area of internal memory. (*: Available if the
EXB-M256 is installed)
You can make settings so that the KEP file data will be
loaded automatically when you power-on the M3
XP
. (☞ page 9 "EX-USB-PCM Auto Load
ANDED
function")
8
Menu button
Media Info tab
KEP file
Load
Load tab
.
Removing (unloading) PCM expansion
option multisamples
Multisamples from a loaded KEP file can be removed
4
(unloaded) from the M3 XP
unloading the loaded multisamples, you can make
room to load other PCM expansion option
multisamples or to record your own samples.
1. Press the MODE MEDIA switch to enter Media
mode, and in the lower right of the display, press
the EX-USB-PCM tab to access the EX-USB-PCM
page.
2. Press a loaded EX-USB-PCM to select it.
Media Select
The "Status" column shows the currently-loaded EX-
3
USB-PCM titles.
3. Press the Unload button. A dialog box will appear,
so press the OK button to unload the data.
The "Status" will change to Unloaded. The bar in the
upper part of the display that indicates the RAM usage
6
will change from blue (EX-USB-PCM) to green (Free),
verifying that the EX-USB-PCM has been removed
from RAM memory.
6
button
5
4. If you want to load a different title, select the EX-
USB-PCM that you want to load, and press the
Load button to load it.
As desired, load or unload EX-USB-PCM01 and 02 so
that you can try out their programs and combinations.
's RAM memory. By
ANDED
2
Status
3
Unload
button
Advertisement
Table of Contents
