Table of Contents
Advertisement
SwITcHING THE bEEPEr off
You can switch the beeper off whenever you want.
1. Press the fast Preheat ( ) and microwave+Grill
(
) buttons at the same time (about one
second).
result:
The oven does not beep to indicate the end of a function.
2. To switch the beeper back on, press the fast
Preheat ( ) and microwave+Grill (
again at the same time (about one second).
result:
The oven operates normally.
muLTISTaGE cookING
Your microwave oven can be programmed to cook food in up to three
stages (the Convection , Microwave+Convection and Fast Preheat mode
can not be used in Multistage cooking). Example: You wish to Power defrost
food and cook it without having to reset the oven after each stage.
You can thus defrost and cook a 1.5 kg chicken in three stages:
If you want to cook some food
• Defrosting
• Microwave cooking for 25 minutes
• Grill for 10 minutes
Defrosting must be the first stage. Combination and Grill can only be
used once during the remaining two stages, However microwave can
be used twice(at two different power levels).
1. Press the Power defrost ( ) button.
2. Select the type of food that you are cooking by
pressing the Power defrost ( ) button. (Refer to 14
page)
CE74JD-CR_XTL_DE68-04168A-01_EN.indd 31
) buttons
31
3. Set the weight by pressing the ( ) and ( ) buttons
the appropriate number of times (1500 g in the
example).
4. Press the microwave (
) button.
5. Set the microwave power level by pressing the
microwave (
) button to select the appropriate
Power Level (450 W in the example).
6. Set the cooking time by 10 min, 1 min and 10 s
buttons. (30 minutes in the example)
7. Press the Grill
button.
8. Pressing the 10 min, 1 min and 10 s buttons
appropriate number of times (15 minutes in the
example).
9. Press the Start ( ) button.
result :
Cooking starts.
When cooking has finished, the oven
will beep and flash "0" four times. The
end reminder signal will beep 3 times.
(once every minute)
2014-05-16
9:09:33
Advertisement
Table of Contents
