Table of Contents
Advertisement
User Guide
Connecting
an External
Device
You can listen to music through the AKT1 by connecting an
external device.
Connecting via Bluetooth
1. Select [Bluetooth] from the external device's settings,
and set it to ON.
2. Select the AKT1 from the list of available Bluetooth
devices to begin pairing.
3. The [Bluetooth] menu item will be activated on the Home
screen. Select a song from the external device to begin
playback through the AKT1's speakers.
Bluetooth Support Specifications
Profile: A2DP
Device performance may be affected during Hi-Fi playback.
(48 kHz or lower is recommended)
DSD playback is unavailable via Bluetooth.
Do not turn off the device while connected to Bluetooth.
Pairing methods may be different for each individual
Bluetooth device. Always refer to the respective instruction
manual for details.
Maintain a distance of 20 cm (8 in) between the AKT1 and the
paired Bluetooth device.
Audio quality will degrade with longer distances, and the
pairing may disconnect at a distance of 2 m (6.5 ft). (Distances
may vary depending on device and environment.)
Crosstalk may be heard while using Bluetooth.
For multi-point devices, make the necessary connections
prior to use.
Malfunction, noise, and other undesirable effects may occur
due to environmental factors.
Instances in which signal interference affects data transmission.
(Holding the external device while wearing another Bluetooth
device, holding the external device while holding another
electronic device, etc.)
Using the Device
36
Advertisement
Table of Contents
