Table of Contents
Advertisement
WIRING DIAGRAM - MODEL 9681062 BELT / DISC SANDER
Plug
MAINTENANCE
Always ensure the sander is turned off
and unplugged prior to making any
adjustments or maintenance to the machine.
Lubrication of the bearings is not necessary, as they are sealed
and pre-lubricated for life. Just replace a bearing if failure occurs.
Do not use compressed air near bearings. Simply wipe the
exposed bearing surfaces with a dry cloth to clean them.
Service beyond recommended maintenance on these tools
should only be performed by an authorized, qualified technician.
Before each use
1. Check the power cord for any damage.
2. Check sanding belts and discs for damage or wear.
3. Check all guards and hardware to make sure they are secure.
4. Check all moving parts for alignment and binding issues.
Before each use
1. Dress/Clean sanding surfaces for best abrasive action.
2. Replace sanding belts or discs when worn or damaged.
3. Clean and vacuum dust from the motor housing and other
sander parts.
4. Keep iron tables free of rust. Apply coat of paste wax or silicon
spray.
18
Black
Black
White
Main
Switch
Green
Green
White
Capacitor
Motor
Advertisement
Table of Contents
