Related Manuals for Palmgren 81091A
Summary of Contents for Palmgren 81091A
- Page 1 & parts list 81091A 6 x 9″ BELT & DISC SANDER Read carefully and follow all safety rules and operating instructions before first use of this product. 25899.09-1130...
-
Page 2: Safety Rules
Disc table tilts ..........0 to 45º Palmgren 6” Belt and 9” Disc Sander is constructed of rugged die Disc dust chute diameter . -
Page 3: Installation
Palmgren Operating Manual & Parts List 81091A SAFETY RULES (CONTINUED) End Shield Armature and Key • Keep children out of the workplace. Make workshop childproof. Disc Guard Use padlocks, master switches or remove switch keys to pre- Set Screw vent any unauthorized use of power tools. - Page 4 Palmgren Operating Manual & Parts List 81091A INSTALLATION (CONTINUED) (A 3-prong to 2-prong grounding adapter is not permitted in Canada.) Where permitted, the rigid green tab or terminal on Running the unit on voltages which are not within the range may the side of the adapter must be securely connected to a per- cause overheating and motor burnout.
-
Page 5: Operation
Palmgren Operating Manual & Parts List 81091A • Mount belt dust chute using washer head screws. OPERATION ADJUST BELT ASSEMBLY POSITION Refer to Figure 7 and 8. Refer to Figure 7. WARNING: Operation of any power tool can result in foreign... -
Page 6: Maintenance
Palmgren Operating Manual & Parts List 81091A OPERATION (CONTINUED) MAINTENANCE Finishing long pieces: remove work stop. Apply only enough pressure to allow abrasive belt to remove material. WARNING: Make certain that the unit is disconnected from • Finishing curved edges: Finish outside curves on flat portion of power source before attempting to service or remove any abrasive belt. -
Page 7: Troubleshooting
Palmgren Operating Manual & Parts List 81091A TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Motor will not start 1. Blown line fuse or tripped circuit breaker 1. If fuse is blown, replace with fuse of proper size. If breaker tripped, reset it 2. - Page 8 Palmgren Operating Manual & Parts List 81091A Figure 8 – Replacement Parts Illustration for Sander...
- Page 9 Palmgren Operating Manual & Parts List 81091A REPLACEMENT PARTS LIST FOR SANDER Ref. Ref. No. Description Part No. Qty. No. Description Part No. Qty. Abrasive belt 20768.00 37 Belt table 24440.00 8-1.25 x 10mm Set screw 38 Belt table assembly 24442.00...
- Page 10 Palmgren Operating Manual & Parts List 81091A NOTES...
- Page 11 Palmgren Operating Manual & Parts List 81091A NOTES...
-
Page 12: Two Year Limited Warranty
This warranty gives you specific legal rights and you may also have other legal rights which may vary from state to state. Responsibility of Original Purchaser (Initial User): • To process warranty claim on this product, DO NOT return it to the retailer. The product must be evaluated by Palmgren. Call (800) 621-6145 for instructions.
Need help?
Do you have a question about the 81091A and is the answer not in the manual?
Questions and answers