Download Print this page

Advertisement

Quick Links

ES-HK800G
WASHING MACHINE
Operation Manual
If the appliance is sold or transferred to another owner or if you moved house and leaving the
appliance, always ensure the manual is supplied with the appliance in order for the new owner
can get to know its functions and its relevant warnings. These warnings have been provided for
your safety. You MUST read them carefully before installing or using the appliance.

Advertisement

loading

Summary of Contents for Sharp ES-HK800G

  • Page 1 ES-HK800G WASHING MACHINE Operation Manual If the appliance is sold or transferred to another owner or if you moved house and leaving the appliance, always ensure the manual is supplied with the appliance in order for the new owner can get to know its functions and its relevant warnings. These warnings have been provided for...
  • Page 2 Contents Before using Parts name........1 Cautions........... 2 Installation and adjustment....4 How to use drainpipe......5 Water inlet installation......6 Operation Preparation before operation ....7 Load laundries........8 Use of detergent........ 9 Control panel instructions....10 Operation steps........ 12 Additional functions......
  • Page 3 Drainpipe The end connect to the appliance The end connect to water inlet hose connector Bottom cover Outfall stopper Water inlet hose (1pc) (1pc) (1pcs) Warning symbols Pay attention to the warning symbols.There may be serious risks on personal safety or may damage the washing machine if not followed. Prohibited symbol The contents of this symbol are prohibited.It may damage the appliance and can lead to injury.
  • Page 4 220V.
  • Page 5 This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.
  • Page 6 Please install and adjust the machine according to the requirements of the manual. Correct operation is very important for your safety. Unpacking Unpack the carton and take out the bottom cover. Open the top lid of washing machine and take out all of the accessories. Remove all wrappers, including the polystyrene base.
  • Page 7 Elbow Less than 1.2m Drainpipe 1.The drainpipe must be hanged during use, the height is not more than 1.2m to avoid leakage or stop, if drain a long time, the machine will stop running. 2.You can adjust the situation of the elbow bend pipe to change the height of the drainpipe.
  • Page 8 Cautions: When install the washing machine, please use the new hose assy along with the washing machine, old hose assy can not reuse. Tap selection Suitable tap Not suitable tap The front end should be longer than 10mm. The tap exit end face should be flat and smooth, if not file it to avoid leakage.
  • Page 11 Put the needed washing powder in the detergent box and softener in the softener box evenly...
  • Page 12: Control Panel Display

    Control panel / Display Plug the machine in and then press this key, the machine will turn on. Press this key again, it will turn off. Press this key after turning on, the selected program will start. Press this key again, the operation will pause. Press it once again, the operation will resume.
  • Page 13 Control panel / Display When turning on the machine, the digital timer shows “--” . If select “Air Dry” program, the digital timer displays the air dry time, unit is MIN. When washing, the digital timer shows the remaining operation time, unit is MIN or Hour.
  • Page 17: Soak Function

    Soak function When you choose “Normal” , “Speedy” , “Air Dry” , “Blanket” , Press and hold “Soft” , “Baby” or “Delicate” program, you can use soak for 2 seconds function before wash. After selecting the program, press “WASH” key for 2 seconds to set soak function.
  • Page 18 Clean the lint filter It is necessary to use lint filter during washing. After washing, please clean the lint filter in time. Clean the lint filter according to the following steps: 1. Pull out the lint filter. 2. Turn the filter net inside out and wash it.
  • Page 19 1. Abnormal display 1. Abnormal display Display Explanation Settlement The top lid is opened Close the top lid and clear up the alarm when preset is started Open the top lid and refer to the "before using" After 15 minutes of draining procedures and "common non fault phenomenon"...
  • Page 22 ES-HK800G 8.0kg 220V~ 50Hz 10/66L 9/61L 8/56L 7/52L 6/48L 5/44L 4/40L 3/36L 2/32L 1/28L 0.03MPa~0.85MPa Wash:480W Spin :335W About 35kg W560mm D585mm H944mm...