Removing The Cover; Overview Of Connections - Viessmann Vitogate 200 Installation And Service Instructions For Contractors

Installation sequence
Installing the Vitogate 200, type KNX

Removing the cover

Fig. 2

Overview of connections

Fig. 3
"1" Plug-in power supply unit connection, 5 V
nal " ", external "+", min. 0.4 A
–
"3" Service interface: Never make any on-site con-
nections
"4" Connection for Ethernet cable (KNXnet/IP)
8
(cont.)
!
Please note
When the power supply is connected, touching
electrical contacts can result in appliance dam-
age.
Always unplug the power supply unit before
removing the cover.
A
, inter- "9" LON terminator, enabled in the delivered condi-
–
tion (position of switch left)
Never adjust
"10" Connection for LON cable
Connection for KNX TP cable
A