Table of Contents
Advertisement
The last item on the Player Setup menu is CONFIGURATION.
This is used to replace default values, setup a password for
SNMP version 3, Set the Real Time Clock, (option: Tuner scan
of available RF channels if the unit is a MP800T), disable the IR
remote number buttons, or to reboot the unit.
Under the Sys Configuration option, you may reset the unit
configuration variables (except for IP address) and also change
the operating language when the on screen keyboard pops up.
This only occurs when the unit is directed to a HTML page and
the cursor is placed in a dialog box. English, Chinese, Arabic,
and Spanish are the on screen keyboard options.
Remote Control
The unit includes a remote control for accessing the On Screen
Display. Press the MENU button to bring up the OSD menu. Use the
Arrow keys to navigate and press ENTER to select an item. If you
wish to exit the On Screen Display, press MENU repeatedly until the
OSD is removed.
If you require a different Video output resolution, the TV MODE button when pressed will toggle through several options
(Composite Only, 720p 60, 720p 50, 1080i 59.94, 1080i 60, 1080p 59.94, and 1080p 60,
In the blue button section you may use: PLAY, STOP, FWD, REV, PREV, and NEXT. Pressing PLAY will alternate between
PLAY and PAUSE.
The numerical buttons may be used to enter a RF channel on the MP800T (tuner) unit. The format is: 041 to tune in channel 4-1.
To tune upper channels, use 331 to select channel 33-1. These channel selections are temporary and will not be kept on a power
cycle. In order to keep a RF channel, it must be programmed into a playlist.
Note: Before the tuner may be used, it may be necessary to perform a RF channel scan to populate
the local channel table.
MP800 UHD Media Player Manual
Page 25 of 45
4K 25, 4K 30, 4K 50, and 4K 60
Rev. 100- 10/17/16
.
Advertisement
Table of Contents
