Technical Manual
Figure 8-1 RJ45 socket viewed from front of MX920
8.1.1 CN6 Simplex Relay
This option maybe also pre-installed or retrofitted at a later date. The N type
connector for the RX port is removed and the relay is mounted in it's position, which
then acts as the RF I/O port for simplex operation. When this option is installed the
radio programming will required to be change to reflect the simplex mode.
8.1.2 CN7 TX Output
This is an N type connector used as the TX RF power output.
© SPECTRA ENGINEERING 2003 Revision 1.1.4
1 .................. 8
Installation and Operation
33