Table of Contents
Advertisement
Cleaning and maintenance
1. Before cleaning, shut off power first, then lift the kettle from base
and cool it down, for safety, do not pull out the plug with wet hand.
2. Never disassembly the body or base by yourself.
3. Do not soak the kettle or base in water. Do not clean the kettle with
high-corrosive or polishing detergent.
4. Clean the body and base with wet cloth, clean the inside with water
or some detergent if required.
5. For best performance, check the filter regularly if there is any
furring, if any, flush it with water or eliminate it with soft brush (metal
cleaner is forbidden).
6. Please refer to relevant operation instructions for furring removal.
Furring removal
1 Add some citric acid (usually 2 spoons) in water before boiling.
2. Close the lid, fit the kettle on base and connect the power.
3. Press "1" to start boiling, when water begins to boil, the kettle will
automatically shut itself off. 30 minutes later, flush the kettle with
clean water for several times.
4. If necessary, repeat the above steps for complete cleaning.
Advertisement
Table of Contents
