Advertisement
PC BOARD INSTALLATION AND WIRING
Depending on the fireplace options, choose the appropriate installation instructions:
A) Fireplace equipped with a wiring terminal
B) Fireplace not equipped with a wiring terminal
*Note: Keep in mind that when installed to a decorative fireplace heat distribution blower
will take longer to reach optimum efficiency as opposed to higher rated units,
which may cause the fan to cicle.
A) Fireplace equipped with a wiring terminal
1
Before installing the PC board assembly, open the bottom louver of the fireplace and
remove the wire knock-out on the left hand side of the air jacket. Install the box
connector (60201) and bring in the wire coming from the blower as shown in Figure 1.
10
Figure 1
Advertisement
