Step 10 Installing Trim, Logs, And Ember Material; Installing The Trim - Royal R-3500TR Installer's Manual

CAUTION
Step 10
Installing Trim,
Logs, and
Ember Material
IF JOINTS BETWEEN THE FINISHED WALLS
AND THE FIREPLACE SURROUND (TOP AND
SIDES) ARE SEALED, A 300° F. MINIMUM
SEALANT MATERIAL MUST BE USED.
THESE JOINTS ARE NOT REQUIRED TO BE
SEALED. ONLY NON-COMBUSTIBLE
MATERIAL (USING 300° F. MINIMUM
ADHESIVE, IF NEEDED) CAN BE APPLIED AS
FACING TO THE FIREPLACE SURROUND.
SEE THE DIAGRAM SHOWN BELOW.
Hearth Extensions
° °