Pc Connection - JVC LT-22DD22J Operating Instructions Manual

PC connection

Follow these steps: On your PC monitor choose a resolution of 1360 × 768 at 60Hz and save this
configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC input mode (see page 12).
Note:
• If no signal or a signal with a non-
supported resolution is connected, No
Signal is displayed
• As this LCD-TV is not a PC monitor
correct display cannot be guaranteed for
every PC / graphics card.
Supported PC resolutions
resolution
640x480
800x600
1024x768
1280x720
1280x768
1360x768
1280x1024
1440x900
1920x1080
Selected Items
Setup
PC Setup
32
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
TV (Rear view)
fps (Hz)
60
60
60
Example: Adjust the H Position.
60
1
60
During PC mode press MENU.
60
60
60
Picture
60
Sound
Channel
Feature
Setup
2
Select Setup/PC Setup/H Position, then press ENTER.
Press
3
Press RETURN several times to return to the normal
screen.
Auto Adjust H Position, V Position, Phase and Clock are adjusted
automatically as per the input PC video signal.
•
H Position To adjust the horizontal placing of the image.
V Position To adjust the vertical placing of the image.
Phase Eliminates the horizontal (PHASE) interfering lines.
Clock Eliminates the vertical (CLOCK) interfering lines.
VGA Cable (not supplied)
Audio cable (not supplied)
to PC/DVI AUDIO input
Setup - PC Setup
Auto Adjust
H Position 0
V Position 0
Phase 0
Clock 0
or to adjust H Position.
Setup hint
When PC-input mode was selected and a PC-signal was
input, Auto Adjust will be performed automatically.
PC