Table of Contents
Advertisement
Auto setup
Your television has an Automatic Tuning
System which makes tuning in your television
easy. This Automatic tuning System scans
the entire reception range in your area and
automatically stores all available analogue and
digital channels of suitable signal strength
in the correct order e.g. BBC1 will tune into
channel 1, BBC2 will tune into channel 2, etc.
Preparation:
Press
(Power) on the unit or press
Standby) on the remote.
1
Auto Installation menu will appear.
Press
or
to select desired language.
Then press ENTER
Auto Installation
- Setup 1 -
Language :
English
German
French
Italian
Polish
2
Press
or
to select your country.
Then press ENTER
Auto Installation
- Setup 2 -
Country :
UK
Germany
France
Italy
Poland
3
Press
or
to select Home.
Then press ENTER
Auto Installation
- Setup 3 -
TV Location :
Home
Please select where the TV
Store
will be placed. The picture
will be optimized for that
location.
4
If you cancel Auto Power Off (see page 20),
press
or
to select Off. Then press ENTER
Auto Installation
- Setup 4 -
Auto Power Off :
Off
Your TV has been set to
1 Hour
power off after 4 hours of
continuous viewing. If you
2 Hours
want to change this setting,
please choose Off. This
4 Hours
setting can also be changed
5
in the MENU.
TV will search for Digital TV-channels at first.
Connect your DVB-T antenna now.
Continue with ENTER to start auto tuning.
The tuning's progress will be displayed in
percent for confirmation.
Auto Installation
- Setup 5 -
Start Auto Tune (Digital)
Note:
•
Please be patient - the Auto Tuning process
can take several minutes to complete.
(On/
.
.
.
6
When the tuning for Digital TV-channels is
completed, you will be asked if you want
to proceed to autotuning for Analogue
TV-channels. If you wish to start autotune
Analogue TV-channels, connect your Analogue
cable-TV antenna and press ENTER.
Note:
•
If you do not wish to carry out the autotuning for
Analogue TV-channels, press MENU to exit the
menu.
Auto Installation
- Setup 6 -
Start Auto Tune (Analogue)
7
When the display reads 100%, normal TV-
screen will appear.
Note:
•
To cancel the auto tuning, press RETURN during the
process.
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 12).
•
If you could not set up a correct pair of language and
country in this auto setup process, you will be able to
make your preferred language selection as illustrated in
page 12 (On-screen Language Selection).
Quick guide for Menu operation
Make sure the antenna connection and power
supply are connected as per the description on
previous page.
Call Menu and for example: Select Auto Search.
1
Press INPUT SELECT. Select TV or DTV, then
press ENTER. Press MENU.
.
2
Press
or
Channel Management
Auto Search
Picture
Digital Manual Search
Sound
Analogue Manual Search
Channel
Feature
3
S t
Press
or
.
Channel Management
Auto Search
Picture
Digital Manual Search
Sound
Analogue Manual Search
Channel
Feature
S
... on the following pages the MENU can be called in
the same way as here.
4
Press MENU to exit the menu.
Note:
•
The Menu screen disappears automatically after a
defined period of time with OSD Timer. (see page 21)
to select Channel then press .
Channel
to select Auto Search, then press
Channel
11
Hide quick links:
Advertisement
Table of Contents
