7.5.3
IP Filter
This screen leads to define a minimum and maximum IP address range filter; all
IP addresses falling in the range are not allowed Internet access. The IP filter
profiles are listed in the table at the bottom of the page. (Note: Click anywhere
in the item. Once the line is selected, the fields automatically load the item's
parameters, which user edited.)
Enable: Click to enable or disable the IP address filter.
Range Start: Type the minimum address for the IP range. IP addresses falling
between this value and the Range End are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling
between this value and the Range Start are not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if user has selected a list item
and have made changes.
Delete: Select a list item and click "Delete" to remove the item from the list.
New: Click "New" to erase all fields and enter new information.
59