Getting Start With Access Point; Know The 54Mbps Wireless Network Access Point; Connect To The 54Mbps Wireless Network Access Point - Encore ENTRWI-G User Manual

2. Getting Start with Access Point

2.1 Know the 54Mbps Wireless Network Access Point

Ports:
● Power Receptor
● Reset Button
● RJ-45 Ethernet Port
Cross-over cable is required to connect to computer directly
LEDs:
● Power LED: ON when the unit is powered up
● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.

2.2 Connect to the 54Mbps Wireless Network Access Point

Build the Infrastructure Mode
2