Calibration; Reset; Reset Settings; Reset All - NEC N6206 User Manual

Table of Contents

CSD settings：to change the connation setting of CS，select the setting needed to change,

DNS settings

4.9

Calibration

When you feel the phone cannot react inaccurately after you use the touchpen to tap some place on the

calibration is needed, which ensures the touch screen of phone can react correctly for

screen,

tapping action.

1. on the screen of "Settings"，tap "Calibration" to enter the calibration screen；

2. use the touchpen to tap the center of cross according to the hint. After threw times, the screen

displays "Calibration OK"。

"Reset settings" is to resume all original default value. After selecting, the system will prompt "Input

security code", then input correct password to reset, and it will prompt "Master Reset". After confirming, the

system resumes the default value and prompts "Master resetting". Using this function will not clear the data

of phonebook and message saved by you own. It only changes the setting of the working environment, such

as the selection of ring tone and phone modes, etc.

"Reset all" is to resume all original default value. After selecting, the system will prompt "Input security

code", then input correct password to reset, and it will prompt "Reset all？". After confirming, the system

will prompt "Deleting all files". Using this function will clear the data of phonebook and message saved by

you own. It only changes the setting of the working environment, such as the selection of ring tone and

phone modes, etc. After completion, the phone will power off automatically, and it is needed to restart.

tap Select to enter corresponding window：

♦ Dial-up number：dial-up number for network service；

♦ Call type：to set the call type between ISDN and Analogue；

♦ User name：user name of network service；

♦ Password：password of network service。

：

input DNS address 1 and DNS address 2。

N6206 User manual

第 31 页

Table of Contents