Table of Contents
Advertisement
CSD setting: modify CSD connection setting, select desired setting and press select to
GPRS setting: modify CSD connection setting, select desired setting and press select to
DNS Setting :input the DNS address (is just the same with GPRS Mode).
4.8 Calibration
When you fell the use the touch pen to touch the screen do not nicety ,please calibration the screen to
insure the screen make the right reaction .Do as the system clew .
4.9 TTS setting
Set this function ,in the idle screen ,long press ,the system will prompt time 、date etc. as voice ,also
can read the message's content as voice :
1. Select "TTS setting "into TTS set window ;
2. Select "TTS state " ,to set incoming call ,SMS,MMS,push message,alarm ,schedule and
remind's tone state;
3. Select "TTS read" ,to set read SMS,read messagelist ,read missed calls ,read unread
message,time prompt ,date prompt and week prompt on or off ;
4. Select "prompt tone ",in to prompt setting window ,to set the prompt tone ;
5. Select "prompt text" ,to set known number call,unknown call , known number message ,
unknown number message.
4.10 Reset
4.10.1 Reset settings
The option may resume all original factory values. After selecting the option, the mobile phone will prompt
you "Are you sure to resume the factory setup". When using the option, it do not clear the materials that you
have saved by yourself such as phone book, short message, and so on. You may only change the operating
environment setups of mobile phone such as selecting rings, scene mode, etc.
4.10.2 Reset all
The option may resume all original factory values. But it will clear the materials you have saved such as
phone book, short message, and so on. The detailed operation is the same as Resuming Setup.
♦ Only CSD: only use CSD
access the related window:
♦ Connect type :to set connect type ,allow to select ISDN an
analogue ;
♦ Dial-up number: dial it and access to network
♦ User name: user name of network
♦ password: user password of network
access the window:
♦ APN: access point name of GPRS gateway
♦ User name: user name of network
♦ password: user password of network
N6305's usermanual
第 33 页
Advertisement
Table of Contents
