Connecting A Load To The Generator - DuroStar DUAL FUEL HYBRID ELITE DS13000EH User Manual

USING THE GENERATOR (CONTINUED)

Connecting a load to the generator

NOTE: Be sure to attach devices to the correct receptacle (outlet).
120v devices can be directly connected to the 120v ONLY receptacles.
●
● 120v devices can be connected to the 120/240v receptacle using an appropriate adapter.
● 240v devices can ONLY be connected the 240v receptacle.
CAUTION: Do not connect 50Hz or 3-phase loads to the generator.
36
1.
Plug in devices
Plug in devices to the appropriate receptacle. When using
the generator in 120/240v mode, balance the load as closely
as possible. Placing more load on one side of the circuit will
reduce the breaker trip period.
2.
Turn breaker on
Flip the circuit breaker up to the on position to allow power to
the receptacles.
3.
Turn on connected devices
Start or turn on appliances starting with the biggest loads
first.