Table of Contents
Advertisement
No resource conflicts were
detected,
but
station does not attach to the
network
Nonfunctioning card LED
Weak signal or intermittent
connection.
Verify that the SSID of the PC Card
matches that of the access point. Use
the Network Configuration Properties
the
wireless
Application in the Control Panel to
modify the SSID.
Verify that the Network Mode of the
PC Card is configured correctly.
The PC Card is not powered on. The
cause may be:
Actions:
Try reorienting the antenna. The PC
Card antenna is attached to the end
of the PC Card. For best use of the
antenna:
Keep the area around the antenna
clear from materials that could block
radio transmission, such as metal
objects, electronic devices, and
cordless telephones.
If your signal is weak, change the
direction of the antenna slightly.
If necessary, move your notebook
computer a few inches to find a better
signal.
Use the Link Quality and Signal Strength
display in the Client Utility to determine the
best location and orientation for a network
connection.
No Driver loaded or installed.
Card – Driver mismatch, which prevented
the driver from loading.
Device conflict, which prevented the driver
from loading.
Verify that a driver has been installed
Determine if there is a conflict with another
device.
36
.
Advertisement
Table of Contents
