Connecting To A Network; Checking And Adding Client For Microsoft Networks - EnGenius EL-2511CD+ User Manual

Chapter 3 Connecting to a Network
This chapter describes how to prepare for connection to network after
install the PC Card drivers and utility.
The following is required for all computers if you want to connect to a
network.
1. Check Client for Microsoft Networks is installed.
2. Check NetBEUI -> Wireless LAN PC Card installed.
3. Check TCP/IP -> Wireless LAN PC Card is installed.
4. Check file and printer sharing for Microsoft Networks.
5. Check computer name and workgroup name.
3-1 Checking and Adding Client for Microsoft
Networks
The Client for Microsoft Networks enables you to connect to other
Microsoft Windows computers and servers and use the files and printers
shared on them. If you work on Microsoft network environment, you need
to set up Client for Microsoft Networks.
1. After finishing installing the driver & utility and rebooting the computer as
described in Chapter 2. The computer will show a dialog box titled Enter
Network Password dialog box. Enter your password if it had been set or just
click Cancel.
2. Click Start button, select Settings and then click Control Panel to open the
Control Panel window.
3. In the Control Panel window, double-click the Network icon to open the
Network dialog box.
4. Select Configuration tab to check Client for Microsoft Networks is installed
as shown in Figure 3-1. If no, click the Add button. Select Client and click the
Add button.
31