Table of Contents
Advertisement
Peer to Peer: If two or more stations exchange data directly
without an access point, you need to select Peer-to-Peer mode.
Each station in a Peer-to-Peer (Ad-Hoc) network must specify the
same network name (SSID) and peer-to-peer channel.
Access Point: If at least one access point involves in the
communications in a group of stations, you need to select
Infrastructure mode. Each station needs to specify the same
network name (SSID) as the access point. Please refer to the
section 1-6 for more details about peer-to-peer mode and Access
Point (infrastructure) mode.
Peer-to-Peer Channel
This option is just for Peer-to-Peer (Ad-Hoc) mode. You need to
specify a channel on which the communications are established. Each
station in a Peer-to-Peer (Ad-Hoc) network must specify the same
channel and network type (SSID).
Power Save Mode
Power Save function as shown in figure 2-3-9 .This function can
conserve more battery energy and extend the battery life. This
function has three options for power save mode. Below is detailed
description.
1.On:
2.Off:
3.Auto:
Enable Power Save function.
Disable Power Save function.
Utility will automatically detect what kind of power
supply a machine uses and then determine to enable
or disable Power Save function.
If device uses battery, Power Save Mode is set to on.
If device uses AC Power, Power Save Mode is set to
off.
24
Advertisement
Table of Contents
