DuroStar DS4000S User Manual page 11

6.
Close choke
The choke lever is located above the air filter to the right
of the recoil start. Slide the lever to the left to cut the air
supply and allow more gas into the engine to start.
7.
Flip engine switch to ON
The engine switch is located on the left side of the front
power panel. Flip the switch to on.
8.
Pull recoil start
Pull the recoil start handle quickly the complete length of the
rope and then let it retract slowly. The unit will generally start
within 3 pulls. CAUTION: DO NOT let go of the handle while
the rope is extended this may cause damage to yourself or
your machine.
8.
Open choke
The choke lever is located above the air filter to the right
of the recoil start. Slide the lever to the right to open the
choke and increase air into the carburetor for normal
running.
10.
Turn breaker on & connect
devices
Connect your devices to the receptacles on the front panel.
Start with the largest loads first.
11