Maintenance And Storage - Challenge PCS38Z Original Manual

37cc petrol chainsaw
Table of Contents

Advertisement

Maintenance and Storage

List of vulnerable parts
Description
Spark Plug
Guide bar
Saw chain
Clutch drum
Maintenance after each use
WARNING!
Before cleaning, inspecting or repairing your unit, make sure that the engine has stopped and is
cool. Disconnect the spark plug to prevent accidental starting.
1. Air filter
Dust on the air filter surface can be removed by detaching the engine cover, removing the filter
and tapping a corner of the filter cover against a hard surface. To clean dirt in the meshes remove
the cover and brush in petrol. When using compressed air, blow from the inside. To reassemble
push the cover back into place, press the rim until it clicks.
2. Oiling port
Detach the chain bar and check the oiling port for clogging.
3. Chain bar
When the chain bar is dismounted, remove sawdust from the bar groove and the oiling port.
Grease the nose sprocket through the grease port on the tip of the bar.
4. Others
Check for fuel leakage and loose fastenings and damage to major parts, especially handle joints
and chain bar mounting and Silencer. If any defects are found, make sure to have them repaired
before operating the unit again.
Models or specifications
LD L8RTF/902700
160SDEA041
PJ057X
910221
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
19

Advertisement

Table of Contents
loading

Related Products for Challenge PCS38Z

Table of Contents