PEUGEOT 301 Handbook page 98

Driving
Displays on the instrument panel
The programmed information is grouped
together in the instrument panel screen.
5 Cruise control off/resume indication.
6 Cruise control selection indication.
7 Programmed speed value.
Programming
96
F Turn thumb wheel 1 to the "CRUISE"
position: the cruise control mode is selected
but is not switched on (PAUSE).
F Set the programmed speed by
accelerating to the required
speed, then press button 2 or 3
(e.g. 65 mph (110 km/h)).
You can change the programmed speed further
using buttons 2 and 3:
- By +/- 1 mph (1 km/h) = short press.
- By +/- 5 mph (5 km/h) = long press.
- In steps of +/- 5 mph (5 km/h) = press and
hold.
Pause
F Switch off the cruise control by pressing
button 4: a confirmation message appears
on the screen (PAUSE).
F Switch the cruise control back on by
pressing button 4 again.
Exceeding programmed
speed
Intentional or unintentional exceeding of the
programmed speed results in flashing of this
speed on the display.
Returning to the programmed speed, by means
of intentional or unintentional deceleration of
the vehicle, automatically cancels the flashing
of the programmed speed.
Exiting cruise control mode
F Turn thumb wheel 1 to the 0 position: the
cruise control mode is deselected. The
display returns to the total mileage recorder.