PEUGEOT 301 Handbook page 188

PEUGEOT Connect Nav
Media
QUESTION
Playback of my USB memory stick starts only
after a very long wait (around 2 to 3 minutes).
The CD is ejected every time or is not played.
There is a long waiting period following the
insertion of a CD or connection of a USB
memory stick.
The CD sound is of poor quality.
Some information characters in the currently
playing media are not displayed correctly.
Playback of streaming files does not start.
Names of tracks and playing time are not
displayed on the audio streaming screen.
40
RESPONSE
Some files supplied with the memory stick
may greatly slow down access to reading
the memory stick (multiplication by 10 of the
catalogue time).
The CD is upside down, cannot be read, does
not contain audio files or contains audio files of
a format not recognised by the audio system.
The CD has been recorded in a format that is
not compatible with the player (udf, etc.).
The CD is protected by an anti-pirating system
not recognised by the audio system.
Upon insertion of a new key, the system reads
a certain amount of data (directory, title, artist,
etc.). This may take from a few seconds to a few
minutes.
The CD used in scratched or of poor quality.
The audio settings (bass, treble, ambience) are
unsuitable.
The audio system does not display some types
of characters.
The connected device does not automatically
launch playback.
The Bluetooth profile does not allow the transfer
of this information.
SOLUTION
Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
Check that the CD is inserted in the player the
right way up.
Check the condition of the CD: the CD cannot
be played if it is too badly damaged.
Check the content in the case of a recorded CD:
consult the advice in the "AUDIO" section.
The audio system CD does not read DVDs.
Due to insufficient quality, certain burned CDs
will not be read by the audio system.
This is perfectly normal.
Insert good quality CDs and store them in
suitable conditions.
Return bass and treble settings to 0, without
selecting an ambience.
Use standard characters to name tracks and
folders.
Start playback from the device.